|
|
|
 "The sooner we get behind the longer we have to catch up." (quoting another engineer from his team) - Matt Leese [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| "The sooner we get behind the longer we have to catch up." (quoting another engineer from his team) - Matt Leese [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
shelf lip
Where is the base kee klamp located on the 2 x 8? Is it centered or is it aligned with the edge facing the playing field? The pictures show the rail on the edge of the 2 x 8 but the drwing show the rail centered.
 
|
|
#2
15-10-2001, 22:42
|
|||
|
|||
|
The keyclamp bases are centered on the 2x6 (edited by Martus), The photos are the actual parts that will be used for the field. Be careful and be sure of what you think you are looking at, camera angles can be deceiving.
Last edited by Mike Martus : 16-10-2001 at 12:13.
|
|
#4
16-10-2001, 12:12
|
||||||
|
||||||
|
Size of board
The size is of the bottom board 2 X 6 standard lumber. Actual measurement is 5.25 or so depending on shrinkage.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| lip on top of the ramp? | bigwalt | Rules/Strategy | 2 | 21-01-2003 14:56 |
| CDI: about that lip on the back of the shelves | Team461 | Off-Season Events | 1 | 14-10-2001 22:20 |
| Diagram of shelf | Joe Johnson | Off-Season Events | 0 | 13-10-2001 08:45 |
| Field and shelf missing dimensions | kmcclary | Off-Season Events | 3 | 12-10-2001 18:21 |
| Shelf Material Brand | kmcclary | Off-Season Events | 3 | 11-10-2001 21:09 |
Linear Mode
