|
|
|
 Strive for excellence in everything you do, but also recognize it in others when you see it, rather than try to drag it down. - Joe G. [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Strive for excellence in everything you do, but also recognize it in others when you see it, rather than try to drag it down. - Joe G. [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
FRC Driver Station Re-image, Will it still work with 2010
Hello everyone, Happy Kickoff
After kickoff my team has been faced with this dilemma. If we re image our driver station Laptop with the 2011 image will it still work with the 2010 control system and be able to connect to our 2010 robot? Thanks |
|
#2
08-01-2011, 23:50
|
||||||
|
||||||
|
Re: FRC Driver Station Re-image, Will it still work with 2010
While I don't know that it was tested, I don't think there were any changes that should not make it work.
One of the things we do on 330 is rebuild our previous robot's code with the new software and load it on the old robots. That way, new members get experience with the whole process and we don't have to worry about cross-year incompatibilities. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
