|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Black Jaguar Replacement (RMA) Process
See below for the updated procedure.
Last edited by Brandon Martus : 09-02-2012 at 17:21. Reason: requested |
|
#2
|
||||
|
||||
|
Would you repeat the link to TI Technical Support website? It didn't open and I've not been able to search TI and find it. Have 1 KOP Jaguar down and would like to RMA it. Thanks,
|
|
#3
|
|||
|
|||
|
Re: Black Jaguar Replacement (RMA) Process
|
|
#4
|
||||
|
||||
|
Re: Black Jaguar Replacement (RMA) Process
Great....good link. Thank you
|
|
#5
|
|||
|
|||
|
Re: Black Jaguar Replacement (RMA) Process
I am already in the process of getting an RMA # from Digikey for a set of Black Jaguars ordered through them that have a startlingly high failure rate, should I put that on hold and do this instead? Or continue through digikey? Thanks.
|
|
#6
|
|||
|
|||
|
Re: Black Jaguar Replacement (RMA) Process
If you need this expedited, please use the RMA procedure described in this thread.
|
|
#7
|
|||
|
|||
|
Re: Black Jaguar Replacement (RMA) Process
I submitted RMAs back on Jan 15th and have not heard anything back yet and really need to get these Jaguars replaced before our next regional. I called the number for support but the gentleman I spoke to wasn't sure what I was talking about so he is checking for me. In the meantime I figured I would post here. Is there anyone else I can call to get this processed? I have submitted 2 and have 2 more to submit.
|
|
#8
|
||||
|
||||
|
Re: Black Jaguar Replacement (RMA) Process
I've had a bit of communication with Billy at support@ti.com after submitting RMA. TI has asked for a bit of diagnostic testing and have yet to provide permission to return controller, so you need to start the communication quickly.
|
|
#9
|
|||
|
|||
|
Re: Black Jaguar Replacement (RMA) Process
Quote:
|
|
#10
|
||||
|
||||
|
Re: Black Jaguar Replacement (RMA) Process
Thank you, this was very helpful.
|
|
#11
|
|||
|
|||
|
Re: Black Jaguar Replacement (RMA) Process
Will they replace Jaguars that have burnt out if the cause is likely aluminum shavings (shorted out)? If not, can you pay to get them repaired/refurbished?
Last edited by wiiking123 : 28-03-2011 at 18:35. |
|
#12
|
||||||
|
||||||
|
Re: Black Jaguar Replacement (RMA) Process
The first year we had the jaguars, when luminarymicro was getting their foot in the door and had alot of problems with them, they sent replacements immediately and asked questions later. We bought 10 jaguars this year ($850 worth of hardware) and one of them was dead out of the box - couldn't get it to connect or configure. I followed the replacement process to the letter Monday morning, and here's the response I got Tuesday afternoon:
I am sorry you have experienced this. Thank you very much for taking the time to provide this. I have put this in the appropriate hands for an evaluation as there is usually a few more questions, or tests before sending a new one. You will hear from me again soon. Still no word today. Maybe it's time to switch back to Victors. |
|
#13
|
|||
|
|||
|
Gary, were you ever contacted by our support team?
|
|
#14
|
||||
|
||||
|
Re: Black Jaguar Replacement (RMA) Process
We just bought 12 and one was dead on arrival. I submitted an RMA request tonight through the digikey website (where we purchased them) and hope to get some better and quick results
|
|
#15
|
||||||
|
||||||
|
Re: Black Jaguar Replacement (RMA) Process
Yes we got the replacement in the mail today. Thanks.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|