FRC LabVIEW install

[artbot345]

My LabVIEW installation had errors and I don't know whats wrong. Here are my computer specs and LabVIEW installation report.
Computer specs:
Model: HP G60 Notebook PC
Processor: Pentium Dual-Core T4300 2.10GHz 2.10GHz
RAM: 3.00 GB
OS: 64-bit Windows 7 Home Premium

Installation report:
Installation Summary

Not Installed
LabVIEW Real-Time 8.6.1
LabVIEW Real-Time Patch
NI-RIO

Installed
LabVIEW 8.6.1
Vision
Vision Assistant 2009 Hotfix
PID Control Toolkit 8.6.1
Internet Toolkit 6.0.2
VISA RT FRC
Vision Plugin
FRC Utilities
FRC 2011 License

[PatrickS]

You need to post specific errors. Without these we will be unable to help.

[artbot345]

Ok when LabVIEW Real-Time 8.6.1 LabVIEW, Real-Time Patch, and NI-RIO start installing the installer exits.

[Joe Ross]

I had similar problems when I was out of disk space.

[artbot345]

That's not the problem but all of the not installed components give me the NI-VISTA error.

[artbot345]

Should I download and install this? http://joule.ni.com/nidu/cds/view/p/id/2185/lang/en

[mck1117]

I'm having the same problem on a Dell Studio 1458. I have plenty of disk space, and this is what the errors are in the installer:

LabVIEW Real-Time 8.6.1

Unsupported version of NI-VISA detected
A version of NI-VISA that is not supported on this operating system has been detected. You must cancel this installation and uninstall the older version before continuing. Refer to ni.com/vista for more information.

NI-RIO

Unsupported version of NI-VISA detected
A version of NI-VISA that is not supported on this operating system has been detected. You must cancel this installation and uninstall the older version before continuing. Visit ni.com/info and enter the Info Code CleanVista for more information.

[SuperS_5]

Is this a fresh install, or upgrade? Ensure that you are installing with administrator privileges. If you had administrator privileges, you may want to try uninstalling all NI components, and then use the MSIblast program to uninstall anything remaining. (MSIblast from the NI forums) Retry installing after a restart. (Remember to use administrator privileges for uninstalling/reinstalling)

[jhersh]

Originally Posted by mck1117

I'm having the same problem on a Dell Studio 1458. I have plenty of disk space, and this is what the errors are in the installer:

Are any of you trying to install on Windows 7 Starter? I know some of the drivers are not compatible with Windows 7 Starter.

[mck1117]

Nope. I'm running Windows 7 Ultimate x64.

[mck1117]

After running MSIBlast, still no luck. Running the setup wizard gives the same errors.

[artbot345]

I'll still getting errors too and when I try to install NI-VISA 4.1 I get Unsupported version of NI-VISA detected.

[Carter12s]

I am also having a problem. I install Labview and everything appears to work, but when i start Labview it is not FRC edition, and I cannot access the WPI robotics library or the default templates. It appears to me that the FRC Tools are not installing so I try reinstalling them and the re-installation does not work. It cites no error and does not inform me of the failure until the very last step, where it presents the installation report, and tells me that "no software was installed" under any of the categories. I looked in the NI Uninstall/Or Modify application and it shows the FIRST Utilities as an uninstallable option. Has anyone else encountered and error like this? Or does anyone have any advice? I have run the install several times now, and i have completely uninstall-ed everything and started from scratch multiple times.

Computer Specs:
Dell with Winodows 7 Ultimate 64 bit
2 Core Pentium with 2.76 GHz
8 GB of RAM