|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
CAN on a budget
after my experiences working on getting can to work on my team in the last few months, i decided to make a .pdf on how to make CAN work this year without killing the piggy bank.
I attached it. comments? |
|
#2
|
|||||
|
|||||
|
Re: CAN on a budget
Thank You for this, I was just researching the best way to go about using the CAN bus. Might I suggest you post this to the whitepapers as well.
|
|
#3
|
||||
|
||||
|
Re: CAN on a budget
i want to do some last proofreading and editing first... once fully polished, it will be headed there.
good luck with you CAN experience! edit- updated file attached. it will be sent to the whitepapers as well. Last edited by ratdude747 : 16-01-2011 at 22:31. |
|
#4
|
||||
|
||||
|
Re: CAN on a budget
Nice paper.
One point of fact that you may want to look into, there are more than 2 FIRST 'Legal' options for CAN. A team could also make their own gateway device using either Ethernet or serial. Good job. |
|
#5
|
||||
|
||||
|
Re: CAN on a budget
Quote:
It has been added as a white paper and i have updated it (attached). It also has a section on how to use a junk serial cable to make the serial adapter (essentially how i made the 2009 KOP cable to work in the first place). Edit- yes, you can make your own adapter. good call. updated file attached. Last edited by ratdude747 : 17-01-2011 at 00:10. |
|
#6
|
||||
|
||||
|
Re: CAN on a budget
lots more original pictures have been added
the new version is at http://www.chiefdelphi.com/media/papers/2433 enjoy! |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|