|
|
|
 The one thing that no one ever list in scouting but is one of the most important factors is reliability. I don't care if the robot scores a hundred balls a match if I can't count on you being out there for the next three because it's a fragile as china. - Koko Ed [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Belt Pulley
Where do you go to get Belt Pulleys? We want Belt Pulleys to attatch directly to wheels, where would you go to order these?
|
|
#3
20-01-2011, 20:44
|
||||
|
||||
|
Re: Belt Pulley
gates is giving free belts including chain belts i believe.. check your USFirst Email Blasts.
kudos
|
|
#4
20-01-2011, 23:43
|
||||
|
||||
|
Re: Belt Pulley
http://www.chiefdelphi.com/forums/sh...ght=gates+belt
Also if you contact Gates they are more then willing to help you select your belt and might even help you with some design. I emailed Shannon Lynch (she posted in that thread) and she put me in contact with a local representative who is willing to help us out. Plus their stuff is free depending on how much you need. If you need more see if there's a team who isn't planning on using their free order who is nearby.
|
|
#5
21-01-2011, 00:17
|
||||
|
||||
|
Re: Belt Pulley
You also may want to take a look at Stock Drive Products:
http://sdp-si.com/eStore/CoverPg/Drive_Components.htm They have a large variety of belts and pulleys, and they ship reasonably fast as long as they are in stock. Their selection is so large that they actually have belts and pulleys which aren't offered directly off the Gates website. If you are looking to drive these pulleys directly off of a wheel I'd recommend Gated GT2 or HTD tooth profile with at least a 5mm pitch.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
