|
recovery for a brick'd tan jag?
I just bricked two of our old (tan/grey) jaguars trying to update them... I was able to update two black jags without issue, so I got brave and went on to the tan ones. I bricked the first one, second jag went fine, and the third bricked. Each time I had only a serial cable into the black jag and a single tan jag in the CAN network. I'm looking at the "getting started guide" for the black jag and I'm realizing that my terminator on the black jag is about 3" or 4" away from where they are prescribing (stated as part of the serial cable), so I'll fix that before trying anything else.
I tried holding down the 'user' button on the tan jags at power-up to try and recover them, but it didn't seem to work. Is there a certain length of time to hold the button for, or a different method for recovering a bricked tan jag?
Thanks in advance.
-Jonathan
|