|
|
|
 "Well-resourced" teams with "deep pockets" don't just spring up, they are usually the result of a lot of hard work. - artdutra04 [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| "Well-resourced" teams with "deep pockets" don't just spring up, they are usually the result of a lot of hard work. - artdutra04 [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Large air accumulator CAD model
Does anyone also have a decent model for the large air accumulator included in this years KOP?
Thanks 
|
|
#2
01-02-2011, 17:43
|
|||
|
|||
|
Re: Large air accumulator CAD model
are you talking about the
air tank manufactured by Clippard Instruments. Since this was a custom product for FIRST there is no data spec sheet, but I was lucky enough to correspond with their great inside sales rep. Here are the dimensions: Length: 11.723 +/- .062 inch Diameter: 2.075 +.001/-.003 inch Fitting: 1/4-18 NPT Accross Flats: 1.250 inch Inside Volume 32 cubic inches If this is the part you are talking about create a circle of diameter 2.075with a height of 11.723 - if you need help let me know. Marie
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
