|
|
|
 There are simply not enough words to say how much the contributions of Dave and Woodie have given to FIRST, and countless students across the world. - Libby K [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| There are simply not enough words to say how much the contributions of Dave and Woodie have given to FIRST, and countless students across the world. - Libby K [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Custom button board/inputs?
I'm seeing some topics on people making custom input devices, and was wondering how you'd go about doing this. Any kind of documentation on it?
|
|
#2
05-02-2011, 08:42
|
|||||
|
|||||
|
Re: Custom button board/inputs?
There are three general ways to do it. One is to use the Cypress PSoC "FirstTouch" board (we received ours in the 2009 Kit of Parts) which is specifically supported by the Driver Station software. eStop Robotics makes a Custom Controls Interface that serves a similar purpose, but it looks like a USB joystick to the software. The last way is to physically disassemble a joystick and wire it up to whatever you want to use.
|
|
#4
08-02-2011, 21:26
|
|||
|
|||
|
Re: Custom button board/inputs?
Can I see a picture of it? I'm not sure google is returning the right thing
Check the 2008 and 09 checklists, not on there Can't find the 2010 checlist Last edited by Brandon_L : 08-02-2011 at 21:48.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
