|
|
|
 Students, mentors, schools, corporations, teams, and communities - they are all critical to the success of FIRST.
. - dlavery [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Students, mentors, schools, corporations, teams, and communities - they are all critical to the success of FIRST.
. - dlavery [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Solenoid slot on Crio question
How many of the NI 9472 blocks on the Crio can we use this year?
|
|
#2
08-02-2011, 23:29
|
|||||
|
|||||
|
Re: Solenoid slot on Crio question
Two, using slots 7 & 8.
Only one can be 24v, so you can have:
Last edited by Mark McLeod : 08-02-2011 at 23:32.
|
|
#3
08-02-2011, 23:35
|
||||
|
||||
|
Re: Solenoid slot on Crio question
Thank you
|
|
#4
08-02-2011, 23:43
|
|||||
|
|||||
|
Re: Solenoid slot on Crio question
Planning on lots of solenoids and/or line tracking sensors?
|
|
#5
09-02-2011, 00:51
|
||||
|
||||
|
Re: Solenoid slot on Crio question
I believe so
 and where can i verify about the amount of solenoid slots?Last edited by takiko1996 : 09-02-2011 at 00:58.
|
|
#6
09-02-2011, 08:27
|
|||||
|
|||||
|
Re: Solenoid slot on Crio question
Taiko,
Two slots will give you 16 individual solenoid outputs.
|
|
#7
09-02-2011, 09:52
|
|||||
|
|||||
|
Re: Solenoid slot on Crio question
That translates to 8 double solenoids or 16 single solenoids.
If you need even more, then Relay/Spikes can be used to get you up to 16 more.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
