|
Re: What are the wire specs for the microswitches?
What specifically are you asking? The current rating is printed on the side of the switch. Use the DC rating if both AC and DC is listed. If you are using them for sensors, then they can be wired with PWM style wiring or #22 or #24 if they are simply being used with the digital inputs on the DSC as they are not power wiring.
See R40 for all power wiring.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Last edited by Al Skierkiewicz : 12-02-2011 at 21:39.
|