|
|
|
 Engineering is all about trade offs. You can design yor system to do A, B or C easily. Combining A abd C or A and B or B and C requires some effort. Combining A, B and C should be near impossible. - Mike Betts [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools |
Rating: 
|
Display Modes |
|
#2
20-02-2011, 16:31
|
||||
|
||||
|
Re: Error code -44061
This thread may help:
http://www.chiefdelphi.com/forums/sh...ad.php?t=92090 But from what our team has noticed, it doesn't really have an effect. The errors went away when we disabled our safety config VI's. It might be possible to prevent this error by increasing the frequency you set for the Safety Config. 
|
|
#3
20-02-2011, 16:36
|
|||
|
|||
|
Re: Error code -44061
The first useful step is probably to look it up. Go to the menubar Help>>Explain Error, and type in the number. Also, the error string should have given you a path to the code where the error initiated. If you can't figure out the error from the information, please post it so that others can be more helpful.
Greg McKaskle
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Error code -44061
Linear Mode
