|
|
|
 While we all look back and appreciate the shoulders of the giants of the past upon which we are standing, let us not forget that we are the giants of today. Ours are the shoulders on which others will be standing in the future. - Mike Rush [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Autonomous Code HELP!
Hey everybody,
I was trying to program our autonomous code and i thought we had it but some motors aren't working. they work fine in teleop but in autonomous they don't do anything. Here is a copy of the code, thanks for all your help 
|
|
#2
22-02-2011, 17:04
|
|||
|
|||
|
Re: Autonomous Code HELP!
The autonomous VI has a broken run arrow. It has a syntax error. Click on it, read the error message, and see if you can resolve it.
Greg McKaskle
|
|
#3
22-02-2011, 17:07
|
|||
|
|||
|
Re: Autonomous Code HELP!
Thats for the pneumatics that we just added, that problem is fixed, but the arm motors are still not working
|
|
#4
22-02-2011, 19:11
|
|||
|
|||
|
Re: Autonomous Code HELP!
Look at the Diagnostics of the DS and see what errors are being reported. It looks like at least one solenoid will give an error, then the robot uses only the arm motors for some time, and then only the drive base.
If the name of the motors no longer matches begin, the motor commands have no place to be sent. Greg McKaskle
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
