Empty Field Picture

[jhellr13]

Hey guys
I'm doing a video where i want to do a special effect. For this effect, I need a picture of the 2011 field, but it has to be empty. Like no robots on it. Tubes are okay, but no robots. People in the back is just fine. I would prefer a perspective view, not really from an angle as that would complicate things for me. A top view as well would not work. Hope you guys can help me out. thanks

[Duke461]

I'll update this post if i find a real picture, but if you can't, you could consider using the manual's field picture:

[jhellr13]

Originally Posted by Duke461

I'll update this post if i find a real picture, but if you can't, you could consider using the manual's field picture:

I was thinking of using this picture before, but i ran into one problem...I want to rotate it so it is straight, not angled like it is, and i can't get it to work. Any ideas

[Duke461]

Originally Posted by jhellr13

I was thinking of using this picture before, but i ran into one problem...I want to rotate it so it is straight, not angled like it is, and i can't get it to work. Any ideas

No idea there
If you have any CAD skills, you could CAD it. 1323 has made fields in the past, but they havent put up this years yet. You could PM someone and see if they have a file.
Currently im looking through team's with well developed website's for photos.

[jhellr13]

Originally Posted by Duke461

No idea there
If you have any CAD skills, you could CAD it. 1323 has made fields in the past, but they havent put up this years yet. You could PM someone and see if they have a file.
Currently im looking through team's with well developed website's for photos.

yea i don't have any CAD skills. thanks for the help

[rahilm]

Originally Posted by Duke461

No idea there
If you have any CAD skills, you could CAD it. 1323 has made fields in the past, but they havent put up this years yet. You could PM someone and see if they have a file.
Currently im looking through team's with well developed website's for photos.

PTC has the full field available here. It is only Pro/E format, though.

[jhellr13]

Originally Posted by rahilm

PTC has the full field available here. It is only Pro/E format, though.

yea idk...i really appreciate the help. I'll figure something out

[rahilm]

Originally Posted by jhellr13

yea idk...i really appreciate the help. I'll figure something out

If you give me a general idea of the type of view you want, I can render the CAD for you and post an image up.

[Tom Ore]

I can render a field for you. I'll be tied up for a couple of weeks so it will be a while before I can get to it. Attached is a render of just the end of the field to give you an idea of what it would look like.

[jhellr13]

Originally Posted by Tom Ore

I can render a field for you. I'll be tied up for a couple of weeks so it will be a while before I can get to it. Attached is a render of just the end of the field to give you an idea of what it would look like.

I'm kind of tight on time, i need it for a school event in 3 weeks. The perspective i want would be like the image first posted above, just straightened out. Like if you were able to take that image, and just make it straight so the picture isn't slanted. That's all i really need

[Duke461]

Ok, i am sooo close to getting you what you need. I found a 3ds Max file of the field. Its well done, and they supplied a photo, buts its in isometric view (not the view you need). the other problem, i dont have the program to open the file, rotate, and re upload. so, if someone that has 3ds Max, would you please help him out and give him a rotated picture.
Attached is a file

EDIT: Does a top view help?
EDIT EDIT: Nevermind, i read above you said a top view doesnt work
EDIT EDIT EDIT: Not 100% if this is a perspective view, but the blog called it one:

[jhellr13]

Originally Posted by Duke461

Ok, i am sooo close to getting you what you need. I found a 3ds Max file of the field. Its well done, and they supplied a photo, buts its in isometric view (not the view you need). the other problem, i dont have the program to open the file, rotate, and re upload. so, if someone that has 3ds Max, would you please help him out and give him a rotated picture.
Attached is a file

EDIT: Does a top view help?

A top view is a good start. Not really what i need, but a start. If someone can PLEASE just rotate the file, and make it a jpeg or something, that would outstanding. Possibly take out the tubes in the middle if they want, though i could probably figure that out with cloning in gimp or something. Please someone help us out

[Duke461]

What about the perspective posted above?

[jhellr13]

Originally Posted by Duke461

What about the perspective posted above?

Look at the first image posted in this thread. That kind of perspective, just straightened out.

[akoscielski3]

Originally Posted by Duke461

No idea there
If you have any CAD skills, you could CAD it. 1323 has made fields in the past, but they havent put up this years yet. You could PM someone and see if they have a file.
Currently im looking through team's with well developed website's for photos.

go to www.3dcontentcentral.com and look up FRC Field 2011. then you only need to change the colour of the parts and it would work... no skills required