pic: FRC973 offseason teaser #4

[AdamHeard]

loading photo ...

[O'Sancheski]

I'm getting sick of all these teasers...

But seriously, I can't wait for the finished product. You better upload a .stp file of it when you are done.

[Nemo]

I'll be curious to hear the final robot weight and how fast it can go with this ridiculously light manipulator hardware to go along with a lightweight WCD.

Was 973 underweight before the offseason modifications?

[AdamHeard]

Originally Posted by Nemo

I'll be curious to hear the final robot weight and how fast it can go with this ridiculously light manipulator hardware to go along with a lightweight WCD.

Was 973 underweight before the offseason modifications?

Our Comp bot was at least 10 pounds under at champs, but it's also being left completely unmodified and will be competing in the fall as it was at champs. All these teasers are for something new

[Aren Siekmeier]

Has it been painted somehow? It looks more like ABS (like out of a 3d printer) than aluminum (which might not be a bad way to go...)

44" is very long....

[AdamHeard]

Originally Posted by compwiztobe

Has it been painted somehow? It looks more like ABS (like out of a 3d printer) than aluminum (which might not be a bad way to go...)

44" is very long....

I apologize for the bad picture, it was hard to get something that long in my poor lighting, with my poor camera. That's just plain 6061 Al after it comes off the waterjet machine. Sometimes the blowback after the cut has been made through will slightly cloud the surface of the part.

We plan to get a black hard anodize with a possible teflon impregnation in it. Neither is really necessary per the math for these parts, but we're getting them anodized anyway (as in, plain color black, so my as well get hard).

[Chris is me]

I can't get over how much engineering must have gone into this in order to use all of this cool stuff in a competition robot. You guys are apparently really taking advantage of this off season to push yourselves.

I'm increasingly doubting any chance of us outworking you.

[Aren_Hill]

obviously a new minibot deploy, tiny gear on the motor shaft next to a rubber wheel for the pole climb. Can be awful far away

(this is sarcasm)

[AdamHeard]

Originally Posted by Chris is me

I can't get over how much engineering must have gone into this in order to use all of this cool stuff in a competition robot. You guys are apparently really taking advantage of this off season to push yourselves.

I'm increasingly doubting any chance of us outworking you.

No engineers, but a lot of engineering A few students and I probably spent a solid few months on it after getting back from champs.

This thoroughly is the most designed system we've ever done, and so far it's really showing with the results we've had in shop. We've tried more new things than we ever have before, and have pushed weightcutting to the extreme. We've also really, really, really started utilizing watercutting in ways far beyond what we did before.

Thanks for the kind words everyone.

[Hawiian Cadder]

depending on how many of these there are, maybe a double lift? one is in the up position while the other is in the down position? with all the weight savings you might have enough to do that.

[rsisk]

First thing I thought: They are putting sails on the robot.

Then I realized the material was just the backdrop ;>

[MattC9]

wait, how do we even know if this robot is going to play logomotion?