|
|
|
 Belts are a fine way of transferring power in a robot. Like chains, gears, drive shafts, viscous couplings or any other means of transmission they require some care and attention on you're part. But no one said this robot stuff was going to be a cake walk. - Andy A. [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
[FTC]: Samantha not connecting ad-hoc
Hello. Our team is unable to get Samantha to connect via ad-hoc mode on our Windows 7, it just blinks. We have disabled bluetooth on Samantha,
and downloaded and compiled"Enable Ad-hoc". I saw the older thread on it, however it had instructions for XP. Thanks in advance. 
|
|
#2
05-10-2011, 11:05
|
|||
|
|||
|
Re: [FTC]: Samantha not connecting ad-hoc
I concur. I am having the same issue. I've connected once (although I still have yet to have RobotC recognize the NXT through the Samantha).
Thanks for any input. Also running windows 7 and RobotC 3.03
|
|
#3
07-10-2011, 21:09
|
||||
|
||||
|
Re: [FTC]: Samantha not connecting ad-hoc
Here is a forum thread dedicated to Samantha AdHoc communications.
ftcforum.usfirst.org/showthread.php?120-Troubleshooting-my-AdHoc-Setup
|
|
#4
11-10-2011, 14:31
|
|||
|
|||
|
Re: [FTC]: Samantha not connecting ad-hoc
I gave up on Ad-Hoc and bought a Router for $50.
It's made a HUGE! different.
|
|
#5
27-10-2011, 14:26
|
||||
|
||||
|
Re: [FTC]: Samantha not connecting ad-hoc
We had issues with ours on ad-hoc until we updated the Samantha's firmware with the samantha.hex file. Now it works fine.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
