CmuCam problem

[Zoom]

Our cmucam does not track the target. We got the code from kevin's site. download it to the rc. did everything. I searched before posting but couldnt find any answers. cam just stays there. The lights are green. what could be the problem?

[Mark McLeod]

Originally Posted by Zoom

Our cmucam does not track the target. We got the code from kevin's site. download it to the rc. did everything. I searched before posting but couldnt find any answers. cam just stays there. The lights are green. what could be the problem?

• Servos are hooked up to pwm01 & 02?
• Camera power is connected by PWM cable to an empty RC PWM output?
• PWM cable is attached to the camera serial port and the RC via TTL converter?
• Backup battery is connected to the RC and fully charged?
• 12v battery is hooked up to the RC and fully charged?
• OI is tethered or linked by radio to the RC and powered?
• Green power LED on the camera power is on?

Can you call up Kevin's tracking and camera menus?
Did you test separately with Labview?

[railerobotics]

We are having the exact same problem and we can access the camera and tracking menus but the terminal window never display's searching. We have a red and green light lit up on our camera.

[Zoom]

when you say pwm 1,2. do you mean the robot controller. if yes. then yes the pwm are in 1 and 2. the power is also good. we checked in labview. it works fine there. but when we use the robot. it does not work. After uploading the code to rc nothing happens in the terminal window.
Can you call up Kevin's tracking and camera menus? sorry, dont what you mean. maybe this is the part im lost at.

[railerobotics]

To get the tracking menu you type "t" at the bottom of the terminal window.
To get the camera menu you type "c" at the bottom of the terminal window.
You'll probably have to reset the robot after you download the code. If you get no response in the terminal window try resetting the robot.

[mallot1243]

I'm assuming that you chose the pwm01 and 02 on the rc and not the jumpers on the camera itself. Also, the default code from Kevin's files are too large to fit in the EduBot Controller, is there a special file for using on the Edu or do I have to commit a hack job on the code to lighten it?
And whoever came up with the idea of only writing the LabView program for Windows 2001 SP1 or higher?

[Kevin Watson]

Originally Posted by mallot1243

Also, the default code from Kevin's files are too large to fit in the EduBot Controller, is there a special file for using on the Edu or do I have to commit a hack job on the code to lighten it?

The code was developed on a EDU-RC. What makes you think it won't fit?

-Kevin

[mallot1243]

My compiled version with other small tidbits of code was nearly 500Kb, when I exported it I used 0x800, would I have to change this?

[Kevin Watson]

Originally Posted by mallot1243

My compiled version with other small tidbits of code was nearly 500Kb, when I exported it I used 0x800, would I have to change this?

It it doesn't fit, the linker will tell you so. Look at the .map file, which will tell you how much memory (flash & SRAM) you've used.

-Kevin

[Joe Hershberger]

Originally Posted by mallot1243

And whoever came up with the idea of only writing the LabView program for Windows 2001 SP1 or higher?

Windows 2001 SP1?

What?

-Joe

[The yellowdart]

pwm 1 and 2 are right on the camera board...on the top or bottom.....depending on the mounting of your camera

[Safarley2901]

Did you try changing the focus of your camera, ours works fine. But If its focussed wrong it wont track it at all.

[or yaniv]

I have the same problem

Originally Posted by Mark McLeod

• Servos are hooked up to pwm01 & 02? yes
• Camera power is connected by PWM cable to an empty RC PWM output?yes
• PWM cable is attached to the camera serial port and the RC via TTL converter?yes
• Backup battery is connected to the RC and fully charged?yes
• 12v battery is hooked up to the RC and fully charged?yes
• OI is tethered or linked by radio to the RC and powered?yes
• Green power LED on the camera power is on?yes

Can you call up Kevin's tracking and camera menus?yes
Did you test separately with Labview?yes

Or

[Kevin Watson]

Originally Posted by or yaniv

I have the same problem...

Download the code mentioned here and report back with the results. This thread may also help. Someone pointed out that they had a defective PWM cable. You might replace the PWM cable you're using for serial communications and see if it starts working.

-Kevin

[Uberbots]

hmm...

ok you are having the smae problem we did.
you have to calibrate your camera, because there is too much noise in your background that is affecting your stats.
the calibration manual (Here) Contains the information you need to calibrate.

also, make sure that you dont have the wrong axes flipped (read the cam manual if you dont know what i maen)