|
|
|
 ...some of our robots could use a proctologist - Scott Ritchie [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| ...some of our robots could use a proctologist - Scott Ritchie [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Wierd program behavior with LabVIEW and 2CAN
We successfully installed the 2CAN, loaded the firmware, found a Jaguar and downloaded version 86 of the firmware to it. On the browser, we could see the voltage and temperature.
However, when we downloaded the Voltage Mode example.vi, it would download, run for a second, then stop with error -52010. Any suggestions? 
|
|
#2
01-21-2010, 11:07 PM
|
|||||
|
|||||
|
Re: Wierd program behavior with LabVIEW and 2CAN
That error means a cRIO "requested resource must be initialized before use."
I still have to make my CAN cables before I can help more.
|
|
#4
01-22-2010, 06:40 PM
|
||||
|
||||
|
Re: Wierd program behavior with LabVIEW and 2CAN
Looking at deployment errors: "Failed to load FRC2CANPlugIn.out" I have revised the nrt-ini file and copied the .out file to the system subdirectory. My 2CAN still stubbornly blinks red.
|
|
#5
01-22-2010, 07:47 PM
|
||||
|
||||
|
Re: Wierd program behavior with LabVIEW and 2CAN
I suspect the problem is that FRC_UserProgram isn't imaged in when the cRIO is imaged for labview. Since the 2CAN plugin uses some of the library that's probably why its crashing. Darn, I thought i had removed all references to classes in the library (Nice catch peterjohnson). Expect an update soon.
Omar Zrien CTRE Software/Firmware Engineer Team 217 The Thunder Chickens 2006 World Champions 2008 World Champions
|
|
#6
01-24-2010, 03:25 AM
|
|||
|
|||
|
Re: Wierd program behavior with LabVIEW and 2CAN
Quote:
|
|
#7
01-24-2010, 08:02 AM
|
||||
|
||||
|
Re: Wierd program behavior with LabVIEW and 2CAN
That makes sense, since the download window states that it 'fails to download FRC_2CANPlugIn.out'....I think Omar is working on that problem.
|
|
#8
02-01-2010, 03:55 PM
|
||||
|
||||
|
Re: Wierd program behavior with LabVIEW and 2CAN
FYI 2CAN update is now available...
http://www.crosstheroadelectronics.com/2CAN.htm Details are explained at ... http://www.chiefdelphi.com/forums/sh...highlight=2can
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| C and LabView version control with Git | Nibbles | NI LabVIEW | 31 | 01-17-2010 07:22 PM |
| help with Compressor and labview | Team2883 | General Forum | 4 | 01-28-2009 10:18 PM |
| NI LabVIEW and Data Acquisition Pilot Program 2006 Application Ready! | Danny Diaz | National Instruments LabVIEW and Data Acquisition | 2 | 10-18-2006 03:55 PM |
| Wierd search behavior.... | Salik Syed | Programming | 7 | 02-23-2006 01:12 PM |
| Wierd error (With edu bot ... | Salik Syed | Programming | 4 | 03-09-2004 09:34 PM |
Linear Mode
