26-02-2004 12:44

Joe Matt

Re: pic: MAK Team 211 Hangin'

VERY NICE! I love the hanging off of the side.

26-02-2004 12:52

Skillz

Re: pic: MAK Team 211 Hangin'

That's impressive, very cool.

26-02-2004 12:56

Duke 13370

Re: pic: MAK Team 211 Hangin'

that looks like it would be hard to line up to the bar. Can you line it up from the player station?

26-02-2004 13:00

nuggetsyl

Re: pic: MAK Team 211 Hangin'

i was talking to 1089 and and they were told that you were not allowed to interact with the side bar in this robot looks like they do that. check with first.

26-02-2004 13:45

nuggetsyl

Re: pic: MAK Team 211 Hangin'

I went and looked the rule up and you really need to talk to a first rep. Here is how the rule reads word for word.

Hanging- A robot is considered hanging from the pull up bar if it is directly supported by the HORIZONTAL BAR and is not touching the carpet, platform or goals.

unless you are only touching the vertical bar you did not score 50 points.

26-02-2004 13:47

Madison

Re: pic: MAK Team 211 Hangin'

The caption reads, "It may not be apparentent from the picture, but it is not touching the vertical bar at all."

It appears as if the robot grabs the horizontal bar in two places, cantilevering the rest of the robot off to the side. It's entirely possible to hang that way without touching the vertical support bar.

Clever idea

26-02-2004 13:49

nuggetsyl

Re: pic: MAK Team 211 Hangin'

Quote:

Originally Posted by M. Krass The caption reads, "It may not be apparentent from the picture, but it is not touching the vertical bar at all." It appears as if the robot grabs the horizontal bar in two places, cantilevering the rest of the robot off to the side. It's entirely possible to hang that way without touching the vertical support bar. Clever idea

26-02-2004 14:28

MasterZeus

Re: pic: MAK Team 211 Hangin'

Thanks for the compliments. I haven't seen anyone else hanging off the side yet. I sure others are out there.

In the team Q&A section, this question has been asked several times. The answer they always gave is that you are allowed to touch the vertical bar, but not support yourself on it. Our mech engineer was paranoid of touching it. So we made our robot capable of hanging just fine without touching it at all.

The top arm flips up automatically when the telescope raises. Limits shut off the telescope when it is 10' high. So basically, all you do is raise the telescope all the way and drive at the arm. Little fingers on the arm spring back and hold us to the bar without the risk of falling off backwards.

It is working much better than most of us on the team thought it would.

26-02-2004 20:38

Jonathan M.

Re: pic: MAK Team 211 Hangin'

Very impresive! I imagine it'll serve you well in competition. ^^