|
|
|
 Eventually, the "less effective" tweaks will settle to the bottom, and the more effective ones will be assimilated by the group. Then someone will tweak the tweak. That's when the fun begins. - Billfred [more] |
 |
|
|||||||
|
||||||||
I did this on Inventor, to find how low the ball would lay under the Overpass. I used the bottum of the bar and the end point of the ball for the Dimension.
Discussion
view entire thread
06-01-2008 22:49
GBIT
Re: pic: Dimensions of the Trackball on the Overpass
did you make the 32" wide overpass on center of the pipes or on the edges?
cause my number don't line up exactly with yours.
here are mine:
http://www.chiefdelphi.com/forums/at...6&d=1199655203
07-01-2008 09:01
Bethany Mc.
Re: pic: Dimensions of the Trackball on the Overpass
I used
32" from center of the pipe to center of the pipe all the way around to form a square.
.75in radius for the pipe from the 1-1/2 steel pipe.
the 40" Trackball.
I made half of the ball in the center of the square and made the arc tagent to the pipe and vertical with the center of the mid point and revolved the ball, then I created a sketch through the center, and projected the geometries of the ball and the bottum of the pipe, returned, and there you go.
view entire thread
Tags
loading ...