22-01-2008 21:28

edgar_amaro

Re: pic: 1225's 2008 Electrical Board

really cool man !!! we are workin on ours ...... still... we had our robot rollin by saturday but instead of the plexiglass we had wood ... so right now we disassemble everything to use plexiglass....

22-01-2008 21:43

bhsrobotics1671

Re: pic: 1225's 2008 Electrical Board

i wish we had that much room..

22-01-2008 21:58

esisso

Re: pic: 1225's 2008 Electrical Board

Quote:

Originally Posted by bhsrobotics1671 i wish we had that much room..

22-01-2008 23:36

kE7JLM

Re: pic: 1225's 2008 Electrical Board

Are you going to use an external Prog./Reset Switch? Is it going to be removable? It is looking good, you have plenty of room for running wires. Good Luck!

22-01-2008 23:49

beemgruem

Re: pic: 1225's 2008 Electrical Board

Its really pretty!!

I wish I had the patient for the cleaning up the wires

It looks so good!

If you are living somewhere near minnesota come and clean my wires, too!!

LoL!! Haha!!

23-01-2008 09:57

vhcook

Re: pic: 1225's 2008 Electrical Board

Looks pretty good. Last year, IFI had recommended that the radio modem be mounted vertically (there's an antenna inside the case, in addition to the external one). For safety, I'd put a little electrical tape on the positive connection to the ATC panel, since it's very close to the negative.

Do you have enough room on the right side to get the serial cables in and out of the robot controller once it's mounted on the robot? They take up quite a bit of room.

23-01-2008 10:09

Jimmy Nichols

Re: pic: 1225's 2008 Electrical Board

Quote:

Originally Posted by vhcook Looks pretty good. Last year, IFI had recommended that the radio modem be mounted vertically (there's an antenna inside the case, in addition to the external one). For safety, I'd put a little electrical tape on the positive connection to the ATC panel, since it's very close to the negative. Do you have enough room on the right side to get the serial cables in and out of the robot controller once it's mounted on the robot? They take up quite a bit of room.