25-01-2008 08:56

Tapoore

Re: pic: 1848 finished base

Are the center wheels rubbing against the Toughbox brackets?

25-01-2008 09:54

IndySam

Re: pic: 1848 finished base

might make it turn better, did you try it?

25-01-2008 10:03

Elgin Clock

Re: pic: 1848 finished base

With the fullsize pic HERE, it doesn't look like it.
It may when it gets pushed around and starts to "take a beating" though.

Nothing a simple notch into the support plate couldn't remedy.

25-01-2008 10:32

Jimmy Nichols

Re: pic: 1848 finished base

Is your mounting plate a sheet of aluminum that you drilled or was it purchased?

25-01-2008 10:43

Synergy1848

Re: pic: 1848 finished base

no, the center wheels don't touch the brackets

thats actually silver pegboard.

25-01-2008 10:50

jason701802

Re: pic: 1848 finished base

you've got the negative running out of the power switch and your not using the power dis. block

25-01-2008 13:02

Astarties

Re: pic: 1848 finished base

if that's not what your talking about, you may want to look at the diagram that's in the FIRST manual, because jason701802 is right.

25-01-2008 13:07

pheadxdll

Re: pic: 1848 finished base

A slight flaw in your wiring. Refer to the eletrical wiring diagram in the manual. (I have no idea which manual, hence why I don't have a link ) Drive train looks good though (no shortage of power ). Good luck!

25-01-2008 13:15

Synergy1848

Re: pic: 1848 finished base

i can't beleive no ones gotten it yet, look at the 2 froint wheels

25-01-2008 13:27

T3_1565

Re: pic: 1848 finished base

well now that it has been mentioned it looks like the two front wheels aren't in the same spot on the pegboard lol.. the left (left in the picture) wheel is closer to the fron than the right one.

25-01-2008 13:28

Jeff Waegelin

Re: pic: 1848 finished base

The chain on the left side appears to be dragging on the ground... looks like the chain was too long!

Is that what you were having us look for?

25-01-2008 13:38

Uberbots

Re: pic: 1848 finished base

You are missing your flux capacitor. you need to remember these things (=

25-01-2008 14:42

Ryan Dognaux

Re: pic: 1848 finished base

... and it looks like the axles for the wheels aren't in the same places on each side. Looks like you'll be moving one of them.

03-02-2008 21:30

BradMello

Re: pic: 1848 finished base

Your axles aren't aligned!

03-02-2008 21:46

Dad1279

Re: pic: 1848 finished base

Design feature. Stagger for left turns.

03-02-2008 21:54

Synergy1848

Re: pic: 1848 finished base

thats what i told our mentor when he noticed it