23-01-2012 12:10

MrForbes

Re: pic: How will 3620 use this gear?

Neat, dual FPs! Are you going to add cooling air holes to the Front Plate?

23-01-2012 12:48

Richard Wallace

Re: pic: How will 3620 use this gear?

Thanks! And yes, cooling holes will be needed. I am thinking 15/64" diameter, eight places on a 0.931 circle. Or something like that.

These motors do need air flow-through, or they'll cook.

Also, the detailed dimensions visible on the drawing may not be correct -- they are based on 0.8 module gear teeth -- actual tooth size is more likely 32 DP. Also, they are based on a 19 tooth pinion, and our -9013 motors have 13 tooth pinions.

23-01-2012 13:55

roystur44

Re: pic: How will 3620 use this gear?

If your clearance hole for the pinion was smaller the motor will sit on the orange washer. Just need to use longer screws for the motor. Your air flow problem will be solved.

Roy

23-01-2012 14:59

MrForbes

Re: pic: How will 3620 use this gear?

Yes, but how do you accurately locate the motor?

23-01-2012 15:14

kramarczyk

Re: pic: How will 3620 use this gear?

Let see. if that is the FP and the first stage from the FP gearbox you have a 13 tooth pinion and a 72 tooth driven gear that gives a speed reduction of 72/13 = ~5.54

Based on data from the FIRSt provided motor specs (http://www.usfirst.org/sites/default...torInfo4.1.pdf) the FP -9013 has a free speed of 16700 RPM. After this reduction that works out to ~3015 RPM. Gosh Richard, what could you ever want spinning that fast?

I wonder if you put a wheel on that shaft what kind of surface speeds you could get?

23-01-2012 16:17

Richard Wallace

Re: pic: How will 3620 use this gear?

My head seems to spin that fast, frequently.

25-01-2012 11:58

Mr. Rogers

Re: pic: How will 3620 use this gear?

Ba dum tsshh!! (you know, with drum and symbol)