18-02-2013 00:50

Steven Sigley

Re: pic: Truck Town Thunder Electrical Board

Let me be the first to say: THIS...is a masterpiece.

18-02-2013 01:00

kstl99

Re: pic: Truck Town Thunder Electrical Board

Great job! My only suggestions are wire duct to make it easier to wire and change and wire numbers to help identify the wires. Do you have a schematic?

18-02-2013 09:38

jwallace15

Re: pic: Truck Town Thunder Electrical Board

Thank you! It isn't completely done yet; we have to add all the encoder wires, solenoid wires, etc.

No, we don't. But one of our electrical mentors brought in a label maker and labled all of our Talons, as well as all of the PWM cables. That way we can easily see where a motor controller goes, or where a PWM goes.

Also, did anyone catch our custom PWM cables?

18-02-2013 12:13

kstl99

Re: pic: Truck Town Thunder Electrical Board

I did notice them. I am curious why. The biggest trouble I have with them is getting them to stay plugged in. We end up using hot-melt glue which would never fly in real machinery. Did you use the standard black 3 pin connectors?

18-02-2013 14:05

jwallace15

Re: pic: Truck Town Thunder Electrical Board

I'm not sure on the actual brand, but we use white ones for plugging into the sidecar. We use standard black females for plugging into the motor controllers (with an insert to make it male). A mentor of ours bought 1000 feet of stranded yellow-red-black wire (I think it's 26 gauge, but don't quote me on that). That way, we can get the exact length we needed.

18-02-2013 14:18

Gregor

Re: pic: Truck Town Thunder Electrical Board

Is the spike for the compressor? Consider switching the fuse to a 20a breaker if so.

And you know you don't have use ALL the ribbon cable that came in the kit, right?

18-02-2013 16:00

jwallace15

Re: pic: Truck Town Thunder Electrical Board

The compressor spike is on a 20 amp breaker. Also, we do know we don't have to use all the ribbon cable, we just haven't cut it yet (we probably will tonight. The pneumatic bumper addition to the cRIO card (NI 9472) will have power wires for our solenoids underneath the ribbon cable).

18-02-2013 22:52

Bill_B

Re: pic: Truck Town Thunder Electrical Board

The advice for 20a breaker involves putting the auto-reset breaker into the spike for the compressor in place of the 20a fuse that you show in place. Using a 20a breaker on the PDB is one thing, but auto-reset in the spike is allowed when the spike controls the compressor as an exception.