|
|
|
 Basically, just because you CAN do something doesn't mean you should and being savvy enough doesn't entitle you to being above the law. - Greg Needel [more] |
 |
|
|||||||
|
||||||||
Here it is, as of 11:20 PM last night within ten minutes of bagging. Some specs:
*VexPro 2-speeds, 4 CIMs, about 15/7 FPS.
*Kitbot-derived 6WD setup, with four long belts for power transmission. We had trepidations, but this choice probably saved us hours of fussing with chain. The only chain we used was between the gearbox and rear wheels to get the reduction we desired.
*Yes, those are four Mini-CIMs on the shooter, fed through our first custom gearbox since 2010 (and the first one I've really been involved in designing in all ten of my seasons across three teams). It took a couple of weeks to dial in, but it's sweet.
*Shooter wheels are 8" FIRST Wheels skinned and wedgetopped. We have the ability to adjust frisbee squish. (The electrical tape is to reduce the chance of a wild belt end catching something and causing more damage.)
*Passive hanger, tested at home and awaiting paint and a little CoG adjustment. Hey, we have to do SOMETHING with the withholding allowance...
Look for us to defend our back-to-back Palmetto Regional titles next week, then our first trip South Florida, then if the planets align Championship, then if the planets REALLY align IRI, and then SCRIW. 
Discussion
view entire thread
20-02-2013 22:30
Akash Rastogi
Re: pic: Los Pollos Locos Presents: Cocket Launcher
4 Mini-CIM shooter? - http://www.youtube.com/watch?feature...Cr8QSGYss#t=5s
Jokes aside, looks good! What's your strategy? Are you going for full field shots?
20-02-2013 22:56
Mike dennis
Re: pic: Los Pollos Locos Presents: Cocket Launcher
Can't wait to see you guys at the South Florida regional! I know a lot of the team who was around for palmetto in 2011 is excited to see you guys again.
20-02-2013 23:05
Billfred
Re: pic: Los Pollos Locos Presents: Cocket Launcher
|
Originally Posted by Akash Rastogi
4 Mini-CIM shooter? - http://www.youtube.com/watch?feature...Cr8QSGYss#t=5s
Jokes aside, looks good! What's your strategy? Are you going for full field shots? |
Could we gear it faster still? Probably. Will every single member of the team that put this robot together kill me if I called for tearing down that gearbox to rebuild it with new plates? Definitely.
We know we can hit from most of that end of the field, but we'll get better data next Thursday. For all the many things the University of South Carolina supports us with, room to uncork this thing is not really one of them.
20-02-2013 23:11
techtiger1
Re: pic: Los Pollos Locos Presents: Cocket Launcher
Billfred it will be good to have you back in Florida. Can't wait for South Florida regional its awesome to have one so close. We were trying to get out to Palmetto this year for a 3rd regional but budget didn't allow it.
20-02-2013 23:26
Billfred
Re: pic: Los Pollos Locos Presents: Cocket Launcher
|
Originally Posted by Mike dennis
Can't wait to see you guys at the South Florida regional! I know a lot of the team who was around for palmetto in 2011 is excited to see you guys again.
|
|
Originally Posted by techtiger1
Billfred it will be good to have you back in Florida. Can't wait for South Florida regional its awesome to have one so close. We were trying to get out to Palmetto this year for a 3rd regional but budget didn't allow it.
|
SPAM, Bacon, and TechTigers* have been great partners in the past and I hope we can get the band back together next month!
*Okay, so TechTigers never picked any team of mine and may have stomped 1618's alliance 264-0 in the Palmetto '07 quarterfinals...but The Algorithm pairing us together over and over is how we got to the quarterfinals to begin with!
21-02-2013 10:30
EricS-Team180
Re: pic: Los Pollos Locos Presents: Cocket Launcher
Gotta echo techtiger1 and Mike. I see Palmetto 2011 as the spark that led to our Championship run. Can't wait to mix it up you guys in Ft. Lauderdale!
Eric
22-02-2013 20:36
DonRotolo
Re: pic: Los Pollos Locos Presents: Cocket Launcher
|
Originally Posted by Billfred
Will every single member of the team that put this robot together kill me if I called for tearing down that gearbox to rebuild it with new plates?
|
Really sharp-looking robot this year from LPL, one year we'll have the time to actually paint a robot before assembling it.
22-02-2013 20:57
Billfred
Re: pic: Los Pollos Locos Presents: Cocket Launcher
|
Originally Posted by DonRotolo
Hmmm. Tempting.
Really sharp-looking robot this year from LPL, one year we'll have the time to actually paint a robot before assembling it. |
We actually painted this robot twice; the first job was a little premature and suffered through some reengineering and disassembly. The paint job is pure rattle-can spray paint, done just outside our shop with a little primer underneath. We probably have about $30-40 invested in it, but to me it makes a world of difference. Incocknito last year wouldn't have been half as imposing in bare metal and wood.
(And wood-bot haters beware, everything garnet in that picture is 1/2" birch plywood. It's not what you use, it's how you use it.)
23-02-2013 02:02
SteveGPageOur team loves birch plywood! Last year, our shooter and our 8" wheels were made of it! This year, we have it as our base. We are looking forward to competing with you and your team next week!
Steve
view entire thread
Tags
loading ...