10-02-2016 02:32

asid61

Re: pic: Flaming Monkeys 2016 Power Take-Off Gearbox

What made you go with a custom ballshifter shaft over the COTS options? What made you go with a belt pulley output over a shaft or sprocket output?

10-02-2016 02:55

Chak

Re: pic: Flaming Monkeys 2016 Power Take-Off Gearbox

whoops, misread

10-02-2016 03:13

Joe G.

Re: pic: Flaming Monkeys 2016 Power Take-Off Gearbox

I imagine the ability to customize the length of the shaft to allow other gears to be placed on it. We are using a similar layout, and had to jump through some major hoops and do some weird things to make the COTS shifter shaft work. If we had the machining resources to build our own ball shifter shaft this season, we would have jumped on it in a heartbeat.

Custom can often be much simpler than COTS.

10-02-2016 10:49

neshera

Re: pic: Flaming Monkeys 2016 Power Take-Off Gearbox

Go Monkeys Go!
See you a week from Sunday?

10-02-2016 23:43

Zaque

Re: pic: Flaming Monkeys 2016 Power Take-Off Gearbox

Team members will be there. Robot will be there too if it's fully functional.

11-02-2016 00:37

Zaque

Re: pic: Flaming Monkeys 2016 Power Take-Off Gearbox

The main driving factor was actually price. These gearboxes are about half the cost of the rocketboxes or WCP DS with PTO. We also wanted the ability to fine tune the reduction and keep it compact while retaining 3 CIMS. The design we came up with required the ball shifting shaft to be driven directly by the motors, so we needed a custom shaft to keep the size small.

We are not set on belt output (lift system is most likely waiting until after bag), it was just in there for spacing.

Let me know if you have other questions or if that explanation was unclear.