|
|
|
 I think that FIRST should just give up and officially recognize Chiefdelphi as the place to go for community and team resources. - Greg Needel [more] |
 |
|
|||||||
|
||||||||
By: Ty Tremblay
New: 22-06-2016 10:03
Updated: 22-06-2016 10:03
Views: 753 times
Custom 24T pulley machined from 5mm HTD pulley stock. Pulley is 30mm wide to accommodate two 15mm belts.
Discussion
view entire thread
22-06-2016 11:32
1493kd
Re: pic: 2x 15mm HTD Belt Pulley
I am guessing this is going to be used for belts in tube drive.
Is the countersink to let the bearing rest inside of the pulley and not need any spacing away from the tube ? We have done that the last 2 years and it works out great. The bearings help hold the pulleys in place while you set all the belts in and hold them in place with hex shaft. Once in place we have not touched it or made any adjustments the last 2 seasons.
22-06-2016 11:35
Ty Tremblay
Re: pic: 2x 15mm HTD Belt Pulley
|
Originally Posted by 1493kd
I am guessing this is going to be used for belts in tube drive.
Is the countersink to let the bearing rest inside of the pulley and not need any spacing away from the tube ? We have done that the last 2 years and it works out great. The bearings help hold the pulleys in place while you set all the belts in and hold them in place with hex shaft. Once in place we have not touched it or made any adjustments the last 2 seasons. |
See this post: https://www.chiefdelphi.com/media/photos/43873?
27-06-2016 11:46
pribusin
Re: pic: 2x 15mm HTD Belt Pulley
Neat concept - worth trying out. Where would one get 5mm HTD pulley stock?
27-06-2016 13:31
Ty Tremblay
Re: pic: 2x 15mm HTD Belt Pulley
|
Originally Posted by pribusin
Neat concept - worth trying out. Where would one get 5mm HTD pulley stock?
|
You can get GT2 pulley stock too, which is compatible with GT3 belts. GT3 belts, while more expensive, are twice as strong as HTD belts of the same size.
You can check out that discussion here: https://www.chiefdelphi.com/forums/s...hreadid=149109
27-06-2016 13:43
asid61
Re: pic: 2x 15mm HTD Belt Pulley
If you're already going to SDP-SI for pulley stocks, might as well go for GT2 pulleys and GT3 belts.
view entire thread
Tags
loading ...