|
|
|
![]() |
|
|||||||
|
||||||||
11-01-2017 10:28
WSiggsWhat material did you use for the high efficiency boiler goal? Also do you plan on adding gear lifts and davits onto the airship, or make those separately?
11-01-2017 10:29
itsjustjon|
What material did you use for the high efficiency boiler goal? Also do you plan on adding gear lifts and davits onto the airship, or make those separately?
|
11-01-2017 10:39
pilleya|
What material did you use for the high efficiency boiler goal? Also do you plan on adding gear lifts and davits onto the airship, or make those separately?
|
)
11-01-2017 10:42
ForeShadow00|
It's probably Polycarbonate since that's what matches the official field boiler.
|
11-01-2017 10:45
ForeShadow00|
For our boiler we simply measured the diameter and length the pipe from the CAD(15inches) then found the circumference, added joining holes( 5/32 rivets every 2 inches worked) and cut it out on our router. 0.118(3mmish) polycarb worked fine for us, but took a little bit of effort to hold it together while rivetting( by little bit I mean person sitting on it
)We did the same for the funnel, just measured, laid it out in 2D in SW then cut it on our router. |
12-01-2017 00:02
Chief HedgehogMost impressive field set up! A lot bit jealous of the build and space... great driver practice in order!
12-01-2017 10:17
wilsonmw04realizing the sightlines are going to be worse than Stronghold.
14-01-2017 20:32
PayneTrain|
realizing the sightlines are going to be worse than Stronghold.
|
14-01-2017 20:50
ctt956|
Yes and we used Masonite for the gear shoots, but we have to figure out a way to make them slicker. We might just move to plexi for those.
|
|
These WILL be the worst effective sightlines in any game in the modern era.
|
15-01-2017 07:24
MARS_James
|
These WILL be the worst effective sightlines in any game in the modern era.
|
15-01-2017 09:37
Mr_I