2010 Denso WIN motor specs

Technical Motors
1

Hey,

Does anyone have the full specs for this year’s Denso WIN motors? We’re having a heck of a time finding them.

Thanks in advance.

2

I have these specs from 2007.

Motors_2007.pdf (202 KB)


Motors_2007.pdf (202 KB)

3

Hi team 612 is looking for connectors from the Denso motors. We need connectors so that we can attach gears to the motors.

4

4 couplers came in the kit this year.

5

Here is a link to a spreadsheet for all the FIRST motors in the kit. CIMs are listed first, but you can pull down a menu to select a different motor in B13, and a new curve will appear.

http://www.chiefdelphi.com/media/papers/2320?:slight_smile:

Hope this helps.

6

Thank you,
We have found the connectors. :slight_smile:

7

Can you help the rest of us out and tell us where you procured the connectors?:confused:

8

please?

9

hey is anyone else using the denso motors to lift their robot? if so, what gears are you using and where can I get some at?

10

You might want to think about using a CIM motor to lift, the denso motors are good for 13watts or so while the CIM motor is good for almost 200watts.

11

Where in the KoP are the connectors? I cannot find them in the check list!

12

any one know where to find the connectors for the denso motors?? or the part number?

[email protected]

13

I found it elsewhere on this forum. I haven’t ordered these myself, so I’m not sure if it is correct. Here is what someone else referenced:

Connector housing - Mouser p/n 829-12129487 - Delphi p/n 12129487
Connector seal - Mouser p/n 829-15300020 - Delphi p/n 15300020
Terminal (14ga) - Mouser p/n 829-12110845 - Delphi p/n 12110845-L

There are several different terminals available, for different wire gauges:
http://connectors.delphi.com/DCSGDMCS/DCS/Catalog/PartDetail.aspx?vUser=GuestUser&vFlag=P&vList=Y&vExact=0&