We have been trying to configure our new router (which came in the KOP), but have been having some issues. More specifically, one issue no matter what we try. Regardless of whether we are trying to configure the router using the configuration tool, or trying to re image it using the respective tool, our computer cannot find the router. We have tried power cycling it, using different computers, using different cords (even a crossover cable) and nothing is seeing it at all. We have viewed it in Windows networking and it does not detect anything either. At this point we are considering the possibility that it might have either been DOA or we did something electrically to it when powering it. Note that all the lights are working as expected, just that none of the connections are working. Any one else have this issue? Anyone else have a solution or did you have to get a new one? Thanks!
Thanks for the response! Your list neatly sums up all the information we managed to find online, however none of it solved our problems. Thanks for the list though!
It seems some of the routers may have been shipped without proper firmware, so give this a try. The instructions in this guide are geared towards FRC Teams, and takes around 20 minutes to complete.
So we tried that also (though to anyone else looking for help, try that it could work for you!), and got stuck where it tries to connect to the router. We have tried everything online and anything we could think of to see if any computer could see the router and nothing could. We had several mentors who are great at this sort of thing try also and nothing. In the end we have determined that our router must be dead. Whether it was DOA or we did something to it is still unknown, but I figure there must be a few DOA units if they are making so many of them. Thanks for everyone’s help though as I’m sure this can help other people having this problem, only with a live router. Thanks!