I was trying to get the wireless bridge to work. I looked at the manual(chapter 5) and followed each step. I got the wireless router and such all set up but on just about the last step(pg. 15 step 11) where it ask you to test your connection, I typed in 10.9.96.1 and nothing came up. I then connected it back to the wireless router with the cable and I typed in 10.9.96.1 and it worked. I double checked all the settings (IP address and such) and they seem to be okay. It seems as though I cant get it to connect wirelessly although wired works fine. Any help would be greatly appreciated.
Thanks.
Do the SSIDs for the wireless router and the WGA match perfectly? They should be your team number with no leading zeros.
Yes, they match.
turn off all security (both the WGA and router, we forgot this at the begining of the season, and spend about 2 meeting trying to connect, and after a regional doing the same)
Another possibility:
When you log on to your bridge, it will show you all available networks. Make sure your router is on there.
Otherwise, from what I read, the IP and stuff is set up right (check subnet mask?), but the wireless link isn’t quite working. Perhaps check if they’re both set up for the same band (5.4)?