On all the discussions on the ir, everyone says the ir jams. Is anyone planning to user the ir, we’re planning to use dead reckoning autonomous
We’re planning a primarily dead reckoning auto mode with some slight ‘adjustments’ made to it by the IR… if the IR doesnt pick up, our auto should still be worth n points, where n belongs to the set of integers > 0.
If anyone is not using their IR Board… Could we use it. We will exchange anything we have that is not on the robot. We are going to the Lone Star Regional.
we got ours working and plan on using it at FLR
We are using ir, but we only expect for one comand to get through befor interferance becomes a problem
good luck guys, have fun
We are planning to use it but had not fully integrated it into our 'Bot when it went into the Box today. Hopefully, it will be all programmed and set to go by the Waterloo Regional (our only trip this year).
We plan on using it to “nudge” the robot a bit to the left and right, and to knock the ball off the overpass
We are telling the robot where the ball(s) are in the 1st few feet then the bots on its own.
we plan on using it for our entire “hybrid.” we were able to practice since week 4 on the code and sending the signal
After reprogramming our IR, we have had good luck with it and we have a great program on it and a good Robocoach. That’s about all we can control, when you could have up to six teams sending IR signals, I can foresee problems.
but doesn’t anyone realize when you try it with two t.v remotes it jams?
We’re using ours to move left/right and get the ball off. We’re using our fourth button to send it around the track until time is up. We haven’t tried using multiple remotes to see if it will jam. We’re hoping that it works and doesn’t explode or anything…