MaC Rhinoceros field model error?

I’m hoping the Field Model image just posted under “recent images”, which shows a truss at the alley bar, is incorrect. We thought the bar was a single pipe about 16" to the top and 14" to the bottom, and that the truss was actually for the field perimeter. Correcto Mundo? J#

I remember seeing a truss on the kickoff feild . . . … maybe its a mistake tho.

The field is two seprate bars with support bars inbetween them, or at least thats what we saw on the kickoff broadcast.

Wetzel

RTFM
Read The First Manual;)

then how could the top be 16" and the bottom 14"?

See here:

http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=3381&direction=DESC&sort=date&perrow=4&trows=10&quiet=verbose

The rhinocerous field model looks correct.
The field in NH had the same “truss” type layout shown.
Two pipes connected by some cross supports.

So what’s the height to the top of the truss- ie how high do I have to lift your stack to set them over the truss to my side? Based on the earlier FIRST posts we had read 16". But now I guess we’re back to 20". Drat