Mobile Device Controller

Technical Electrical
1

Since we haven’t gotten ours…We just wanted to know if anyone has gotten their mobile device controller power adaptor in your kit of parts. Thanks! :confused:

2

? The kit doesn’t include a power supply for the cRIO (aka Mobile Device Controller). You’re expected to connect it to the PD per the Power Distribution Diagram.

Russ

3

Already attached to the cRIO is one half of the connectors you will need to make your cable. On the end the little black connector with 4 holes. In your KOP there should be another one, using these two connectors use a piece of 2 conductor wire 20 AWG or larger (meaning larger diameter).

-Mike AA