No CAN tab on RoboRIO, but we do have the Phoenix web stuff installed

[Benbotics]

When opening the RoboRIO’s web interface from WiFi or USB, we do not have a tab to configure the CAN bus and IDs, and all the other tabs simply do not work. We’ve tried rebooting the RoboRIO a few times, reloading the page, logging into the RoboRIO (via the ‘admin’ account), and other things. Here is a screenshot of the web dashboard if you need it:

It is totally blank, even after clicking on the 2 tabs that are shown on the left.

[Thad_House]

There is no CAN tab anymore. You have to use the Phoenix Tuner tool to configure CAN devices now.

[Benbotics]

I’ll take a look, thank you for your help!

[ozrien]

Some more info

• the page is half-rendered because the RIO web inteface does not work well with Internet Explorer in general.
• NI’s web-dash dropping support for CAN is mentioned here…
  https://phoenix-documentation.readthedocs.io/en/latest/ch06_PrepRobot.html?highlight=web#verify-the-robot-controller-web-page
• If you were using a RIO-supported browser, you would notice a label indicating that CAN support has moved (after installing Phoenix to RIO)…