We’ve been putting our digital sidecar on/in our cRio the past two seasons but just using a few pieces of PVC holding up. This year we 3D printed it, making it a lot more stable, and well…cooler! You can download the model here on thingiverse - http://www.thingiverse.com/thing:237694
Are you still able to fit the solinoid module in with this? I looks like you can…
Very, very cool.
No, it only allows for two cards. We use the card guides inside to help secure the table in. You coudl probably move the legs in to allow for a 3rd card. We just posted the .step file so you can easily edit the table to use your own numbers.
Note: The holes are not perfect from table to digital sidecar, but this was done so that the leg would fit against the empty slots, making a tight fit. Use zip ties to connect the DS to table for best results.
Here’s the link to .step and .stl files. http://www.thingiverse.com/thing:237694/
Nice! just downloaded your CAD off of thingeverse and am making some edits, quick question when you printed it what machine did you use and did you raft it ?
We printed this with our Makerbot Replicator 2. We printed right to the table, no raft, structure, etc.