pic: 3D Printing on the way to St. Louis

[Rohawk1]

[Flimsor]

Awesome! Just out of curiosity, do the bumps and movements from driving affect the printing quality?

[Teamcodeorange]

Awesome! Just out of curiosity, do the bumps and movements from driving affect the printing quality?

I’d be surprised if bumps didn’t affect build quality. Cool idea though.

[Rohawk1]

Awesome! Just out of curiosity, do the bumps and movements from driving affect the printing quality?

Surprisingly no! Probably because I put a ton of CubeStick on the plate before the print so it was basically glued on there.

[Michael_Hill]

Imagine dealing with the ABS smell all the way there.

[cbale2000]

Imagine dealing with the ABS smell all the way there.

Hopefully the bus is well ventilated. I get headaches just being around our Cube printer when its running from the smell (and that’s with PLA).

[Flimsor]

Surprisingly no! Probably because I put a ton of CubeStick on the plate before the print so it was basically glued on there.

Oh, that’s cool! This was a great idea. Good luck at champs!

[Rohawk1]

Oh, that’s cool! This was a great idea. Good luck at champs!

Thanks! You too!