So, since this is probably the time of the season where teams are really starting to realize their designs and doing some weight calculations to see how close to the limit you are, or if x motor can power y device, or if your robot is going to tip over, I thought it would be nice to have one common location for weights for different devices. I’ll start with what I have so far, and if people add to the list below my post, I will update this first post with the new parts. Also, I will show parts as verified if somebody confirms a weight. At least it will give you a starting point for weight watching (tm?).
Can anybody show me how to do a table, if possible?
BTW…NBD is Nothing But DeWalts
Also, at the end, I’m listing items I am going to try and find weights for by searching or weighing myself when I get to the lab tomorrow. But, if you have any information about anything, I will add it to the list. Thanks!
Format:
Part name, Numeric Value, Units, Verified, Note
Pillow Block Bearing, 12.9, Oz., Not Verified, Kit part FAFNIR
1" Sq. Aluminum Tube 0.062 Wall, 0.274, lbs/ft, Not Verified, Alro Catalog
1x2" Aluminum Tube 0.125 Wall, 0.808, lbs/ft, Not Verified, Alro Catalog
3/4" Aluminum Round 0.125 Wall, 0.391, lbs/ft, Not Verified
1/4" Aluminum Plate 6061-T651, 3.63, lbs/sq ft, Not Verified, Alro Catalog
1/8" Aluminum Plate 6061-T6, 1.764, lbs/sq ft, Not Verified, Alro Catalog
1/16" Aluminum Plate 6061-T6, 0.889, lbs/sq ft, Not Verified, Alro Catalog
Battery, ~12, lbs, Not Verified, Weight varies slightly battery to battery
Battery Connector
Compressor
CIM Motor
CIM Motor NBD
Fisher Price Motor
F-P Motor NBD
F-P Motor w/ Gearbox
Globe Motor
Globe Motor NBD
Mabuchi Motor
Window Motor
Van Door Motor
Clippard Tank
RC
Spike
Victor
Power Dist. Block
Solenoid Valve
6 AWG Wire
10 AWG Wire
LED’s
#35 Chain
#25 Chain
5/8" Steel Shaft
3/8" Steel Shaft
3/8" Aluminum Shaft
#35 Sprockets
#25 Sprockets
Wheels and Tires
5/8" Bearings
3/8" Bearings