Stupid but important question with the axis camara

zackcool123 · January 18, 2009, 7:48pm

I am having a problem connecting and viewing to the axis camara on a browser when it is pluged in to port 2 on the Crio. Any help

Bongle · January 18, 2009, 7:52pm

The camera is on a separate network when it is plugged into the cRIO, you cannot view it from your computer. The best you can do is set up a live feed in LabView or WindRiver (I don’t know how to do it, but search for it) where the cRIO compresses the image as a JPG then forwards it to your computer.

zackcool123 · January 18, 2009, 7:58pm

thanks:cool:

jmanela · January 18, 2009, 9:16pm

just use the tutorial that they give you in the NI FIRST community site

techsupport07 · January 19, 2009, 12:08pm

you cannot view the camera when it is plugged into the cRIO. the camera and your computer will be on different subnets…therefore you will not be able to see it. to make sure it is working, connect the camera directly to your compuer via ethernet port and set your computers NIC to a static IP and make sure it is on the same subnet as the camera.