two camera modes

My team is trying to figure out the two camera mode switch with a button. Am I assuming correct that this would be in the teleop section? We are a very small team, with only one programmer. Any examples would be great!
Thanks all!

I’m not quite sure if I get what you’re saying, but if I do, I did this by putting sending data to the dashboard and switching the camera feed from there. If that was not the question, or you don’t understand, feel free to ask and I’ll try to help you a bit more.

Envoyé de mon iPhone en utilisant Tapatalk

No, we can get 2 different camera streams to the dashboard.
We are trying to button toggle a mode switch. So we don’t have to let go of the controllers to change modes.
The FRC LABVIEW PROGRAMMING manual has only one page and it only has that one photo with an empty space where the odd camera settings go.

Here is the FRC page.

This is my program this year, you might want to take a look at the Vision Processing vi:

Envoyé de mon iPhone en utilisant Tapatalk

olidem123, Thanks for your help! We got it working today! :ahh:

np, happy it worked :slight_smile: